Our R&D center is committed to constantly researching and improving the application of microenvironment controls within showcases. This research focuses on increasing control over air exchange and the relative humidity in showcases, eliminating suspended particles and polluting gases, designing convenient and safe opening methods, filtering ultraviolet and infrared radiation, and creating customized environments within showcases, among other initiatives. All new mechanical devices and new materials are subject to strict testing and inspection by our R&D laboratory. With technical support from our R&D center.
Display Pedestal
Pedestal of showcases and the exterior facings of these plinths are composed of different materials, most commonly steel plates, wood, and stone. You can make your decision on the type of material to choose based on the weight of the exhibits and the weight-bearing capacity of the plinth base. The standard design is a steel plinth base with a weight-bearing capacity of 150Kg/m2 and an electrostatic coated steel plate finish on the exterior facing.
SELECTION OF GLASS
For security and safety reasons, we recommend laminated glass. The PVB interlayer in laminated glass will hold the glass together if broken, protecting the exhibits inside. In addition, the PVB interlayer resists penetration or physical attack by forming a physical barrier against theft. Moreover, laminated glass can filter 99% of ultraviolet rays from the light outside showcases within a wave length of 280~380nm.
Available glass types include:
COMMON FLOAT GLASS
EXTRA-CLEAR GLASS
ANTI-REFLECTIVE GLASS
ACCESS OR OPENING OF SHOWCASES
The design of the opening method for showcases will depend on the type of showcase, its size and position, the size of the exhibit, the operating preferences of the museum staff and other factors. Regardless of the opening method, we take close safety precautions and ensure independent operation by one person.Beside horizontally hinged access,the choices available are
Pedestal of showcases and the exterior facings of these plinths are composed of different materials, most commonly steel plates, wood, and stone. You can make your decision on the type of material to choose based on the weight of the exhibits and the weight-bearing capacity of the plinth base. The standard design is a steel plinth base with a weight-bearing capacity of 150Kg/m2 and an electrostatic coated steel plate finish on the exterior facing.
HINGED SIDE OPNING
100% opening access
DOUBLE-LEAF ACCESS
90% opening acces
PULL & SLIDE DOOR
90% opening access
PIVOT & HINGED TOP ACCESS
The opening access is greater than the display height
DRAWER ACCESS
100% opening access
DISPLAY ENVIRONMENTAL CONTROL
The interior of a showcase is a relatively air-tight environment. We create a stable inner environment within the showcase to ensure your exhibits do not suffer damage from changes in environmental factors outside the case.
The protection we provide is:
AUTOMATIC DISPLAY HANGING SYSTEM
TEMPERATURE CONTROL
OXYGEN CONTROL
HAZARDOUS SUBSTANCES CONTROL
LIGHTING
We provide a variety of lighting solutions to meet clients’ different needs.
- LOW VOLTAGE
- HALOGEN LIGHTS
- FIBRE OPTIC LIGHTING
- FLURESCENT LIGHT
- LED LIGHT
AUXILIARY FUNCTIONS
LIGHTING MODULES
AUTOMATIC DISPLAY HANGING SYSTEM
SHOWCASE COMPREHENSIVE MANAGEMENT SYSTEM (TCFA)
OUR SERVICE APPROACH
Through in-depth communication with our Clients, we achieve a thorough understanding of our clients’ overall design and planning objectives for the exhibition. This approach comprehensively outlines their needs and specifications.
By drawing on our in-depth experience of cultural relics and museum exhibitions, our designers, along with museum curators, conservators, historians, consultant architects and other experts will assist the Client in the development of their project ideas and manage the details to a successful project solution.
Our technically advanced factory and skilled professionals will ensure high quality products that perfectly match the design.
The ISO9001 quality control system is implemented throughout our production processes. This effectively guarantees the optimal production and fabrication of each and every component. Inspections are conducted to ensure the products meet the client’s specifications.
All items are carefully packed and protected against damage. Shipments are monitored throughout every stage of the cargo’s journey to the destination. Our logistics department provides continual updates on the progress of the shipment until it reaches its destination.
Our on-site installation team has the highest level of technical training and extensive installation experience. All components and individual product units come together at this final stage.
Our professional after-sales service ensures that each product is in perfect working condition. We are available at all times to provide technical consultation and updates on information